The NSP-350F2 20-degree round-head framing nailer features an ergonomic design, an adjustable depth-of-drive, a work contact element, a 360-degree adjustable diffuser cap, a two-finger trigger, and nail lock-out. It also includes a rubber grip, an angled air inlet, and a rafter hook. The tool drives 20-degree plastic collated framing strip nails from 2 to 3-1/2 inches long and .113 to .131 inches in diameter. Price: $279. 888-631-2020. www.duo-fast.com.
Designed for installing wire mesh cable trays, the battery-operated ETS8 cable tray cutter cuts .191-inch-diameter cable tray wires in two seconds, according to the firm, and makes about 250 cuts of this diameter per battery charge. The tool's head rotates 330 degrees for optimal cutting position. The tool cuts cable tray almost flush with the cross wire, says the maker, and doesn't leave a burr when finished; it automatically retracts after the cut. It weighs 3 pounds and can cut wires up to 5/16 inch. Price: $995. 800-435-0786. www.greenlee.com.
Made of high-strength plastic, the Pro150Turbo chalk line is virtually indestructible, says the firm, and its 3-1 fast-retrieve system offers fast rewind with the push of a button. The tool's refill chamber holds most standard 8-ounce chalk bottles and its Turboline snaps clean and sharp lines while holding more chalk for more snaps. A maintenance cap at the end of the line allows for easy cleaning. Price: $37. 630-848-2000. www.chhanson.com.
The MM125 miller mills angled chamfers on straight, curved, and contoured edges. Its milling head has two indexible cutters for more than 400 yards of cutting per edge in mild steel, the company says. The tool works on a variety of materials, including tool steel, stainless steel, aluminum, non-ferrous metals, and plastics, and it features a rotating replaceable guide bushing fitted with durable bearings for smooth operation and long life, and a knurled dial for adjusting chamfer depth. Price: $350. 877-897-6220. www.perlesusa.com.
The PKT-7-RK90 air nailer can be used with a compressor or with the company's KT-3500 air cylinder. The tool drives round-head nails up to 3-1/2 inches long (including ring shank) with plenty of power in either mode, the company says. The air cylinder can be refilled by the user with a PKT Fillmaster 350 compressor. Price: Unavailable. 877-773-2362. www.prebena-usa.com.
The Rap-A-Nail RNS-150 (shown) and RNS-250 single-blow tools offer faster and powerful nailing for high-volume jobsites, according to the firm. The RNS-150 drives 1-1/2-inch nails; the RNS-205 drives 1-1/2- to 2-1/2-inch nails for specific codes. Price: Unavailable. 888-689-2529. www.pneutoolsinc.net.