More stories about Features

  • Tool Test: Combination Lasers

    My first encounter with construction lasers was 20-plus years ago on a commercial job site, where a subcontractor was using a rotary laser to level the track for a suspended ceiling. The tool obviously saved a lot of time, and even though it could only shoot level, I was jealous that my company...

  • Tool Test: Inline Circular Saws

    Fifteen years ago, when I started out as a framer, Skil was the only real choice for carpenters looking for an inline saw. Since then, a lot more companies have started making these tools and now there are quite a few to choose from.

  • Tool Test: Framing Nailers

    As a framing contractor, I rely on nail guns more than almost any other tool. When I buy a framing gun I look for a model that is comfortable to handle, able to toenail well, and powerful enough to drive nails flush every time.

  • Buyer's Guide to HEPA Vacuums for RRP Work

    With the enactment last spring of the EPA's Renovation, Repair, and Painting (RRP) rule, contractors are facing a number of new requirements, one of which is to use a HEPA vacuum for cleanup whenever lead-based paint is disturbed. The rule also says that HEPA vacs need to be used with tools that...

  • Tool Test: Airless Paint Sprayers

    We gathered nine pumps, ranging from midlevel budget models to a few suited for everyday use on smaller jobs – they just had to be able to handle the pros' requisite .019-inch tip. Our painter of 25 years used them with interior and exterior latex paints to determine their worth from a full-time...

  • Launch Time 2010

    As tool makers prepare to roll out their newest products at the annual STAFDA (Specialty Tools & Fasteners Distributors Association) Show, Tools of the Trade is right there with them – and, in some cases, a step ahead, with an advance look at what will be unveiled in the coming year. Here's just a...

  • Hands-On Hand Tools

    We've carefully selected more than 50 hand tools to share with you this issue. This diverse collection of tools represents the next generation of designs, with features that will help you carry on your own legacy of quality and provide continued enjoyment in your particular trade.

  • Tool Test: Concrete Pinners

    Tools for nailing through steel or into fully cured concrete used to be limited to PATs (powder-actuated tools), but gas-powered pinners are gaining popularity. And there are powerful pneumatics – some old and some new – that have been flying under the radar for some time even though they excel at...

  • Tool Test: Six-Inch Jointers

    Jointers are the go-to tools for straightening and squaring lumber, and standard-length 6-inch-wide capacity models are a great choice for most carpentry and trim uses in the shop and on the job site. These 46-inch bed machines are the entry-level size for stationary jointers and, as the smallest...

  • 2010 Editor's Choice Awards

    This year's search for outstanding new tools, equipment, and innovative features was as challenging as ever, given the continued rate of product introductions from all corners of the manufacturing world serving professional construction markets.