More
Fastening and Nailing
articles . . .
Tool Test: Cap Staplers and Nailers
Cap It Off!: The days of simply stapling roofing felt and housewrap to sheathing are gone. Here are 10 tools that meet today's new standards.
TOOLS OF THE TRADE Magazine
(November 28, 2007)
23-Gauge Pin Nailers
Light and Loaded: We field-tested 11versatile 23-gauge pin nailers that will help you in the shop and on the job.
TOOLS OF THE TRADE Magazine
(July 16, 2007)
Metal Connector Nailers
Hanger Bangers: Eleven specialty nailers for fastening framing hardware.
TOOLS OF THE TRADE Magazine
(January 17, 2007)
AutoFeed Screwguns
We tested eight autofeed screwguns for subfloors and decking. Here's how they compare.
TOOLS OF THE TRADE Magazine
(May 8, 2006)
Hoseless Nailers
Fire When Ready: Hoseless nailers continue to improve, bringing us closer to compresser-free jobsites. Here's a look at the latest unplugged framers and finish nailers.
TOOLS OF THE TRADE Magazine
(September 18, 2006)
Hammer Tackers
If you're squeezing the trigger on a staple gun, you're moving too slowly. Check out 18 hammer tackers that should be a staple on any jobsite.
TOOLS OF THE TRADE Magazine
(September 18, 2006)
Straight-Magazine Finish Nailers
Features drive the differences between these 10 straight-magazine pneumatic finish nailers.
TOOLS OF THE TRADE Magazine
(May 18, 2005)
Coil Roofing Nailers
New and retooled, the latest crop of roofing nailers hits the target.
TOOLS OF THE TRADE Magazine
(July 14, 2005)
Brad Nailers
Small brad nailers play a big role when it's time for trim-out.
TOOLS OF THE TRADE Magazine
(September 29, 2005)
Feature: The New Nailers
Eight new framing nailers are all about power, safety, and versatility.
TOOLS OF THE TRADE Magazine
(May 14, 2004)
15-Gauge Finish Nailers
Innovative designs and lightweight materials improve the performance of finish nailers.
TOOLS OF THE TRADE Magazine
(October 25, 2004)
Combination Hammers
Seven combo hammers that chip, drill, and break their way through concrete, masonry, and tile.
TOOLS OF THE TRADE Magazine
(March 1, 2003)
Medium Crown Staplers
Crown Jewels: Ten pneumatic staplers that will make you money.
TOOLS OF THE TRADE Magazine
(November 1, 2003)
Pneumatic Nailers for Framing Hardware
Four new nailers make it faster and easier to install joist hangers and other framing hardware.
TOOLS OF THE TRADE Magazine
(November 1, 2002)
Narrow-Crown Staplers
Whether you use them for exterior trim, cabinetry, or countertops, pneumatic narrow-crown staplers can add versatility to your tool arsenal. Here's how 13 models stack up.
TOOLS OF THE TRADE Magazine
(August 1, 2001)
Framing Nailers
Engineered lumber really tests pneumatic framing nailers. Here's how 15 models meet the challenge.
TOOLS OF THE TRADE Magazine
(March 1, 2001)
Plate Joiners
Forget your doweling jigs. These tools make short work of tight joints.
TOOLS OF THE TRADE Magazine
(July 1, 2000)
Drywall Screwguns
Drywall screwguns help hangers work faster and achieve better results. Here's how nine new models compare.
TOOLS OF THE TRADE Magazine
(May 1, 2000)
Siding Nailers
Coiled siding nailers are a big hit with our tester, who test-drove eight new models on three types of siding.
TOOLS OF THE TRADE Magazine
(November 1, 2000)
|
About 30 years ago, when I made the decision to start using framing nailers and their expensive collated nails, there wasn't much to choose from; there were only two big players. The tools themselves were basic, so I made the buying decision mainly on the price of nails and who could provide the best service for the tools. I favored round-head nails and have stuck with them ever since, having gone through about 1,000 nailers since that time in my production framing business.