More Cutting and Sawing articles . . .

Tool Test: Portable Jobsite Table Saws
Big Little Saws: Eight portable table saws roll onto our jobsites for hands-on field tests.
TOOLS OF THE TRADE Magazine (November 14, 2008)

Tool Test: Cordless Recip Saws
The Dirty Dozen: 12 cordless recip saws that'll go anywhere and cut anything
TOOLS OF THE TRADE Magazine (September 21, 2008)

Tool Test: Sliding Miter Saws
Super Sliders: 9 powerful but pricey sliding compound miter saws that cut big.
TOOLS OF THE TRADE Magazine (July 29, 2008)

Tool Test: Portable Miter Saw Stands
Work with one of these miter saw stands and you'll know when to roll 'em and when to fold 'em
TOOLS OF THE TRADE Magazine (July 29, 2008)

Tool Test: 12-Inch Miter Saws
Mighty Miters: 8 compound miter saws tough enough for the jobsite and fine enough for the shop.
TOOLS OF THE TRADE Magazine (July 29, 2008)

Circ Saws
The Sidewinders: We field-test 16 new saws for features and performance.
TOOLS OF THE TRADE Magazine (April 26, 2007)

Cordless Circ Saws
Across the Board: These 11 cordless circ saws have come a long way in power and features.
TOOLS OF THE TRADE Magazine (September 12, 2007)

Electric Chainsaws
Chain Reaction: Read this and you'll consider adding an electric chainsaw to your tool arsenal.
TOOLS OF THE TRADE Magazine (March 1, 2007)

Recip Saws
Bringing Down the House: Down-and-dirty demolition made easier with 10 high-performance recip saws.
TOOLS OF THE TRADE Magazine (March 9, 2006)

Cut Out Saws
Part Jigsaw, part router, part lifesaver, cut-out saws are the tools to use when nothing else will do.
TOOLS OF THE TRADE Magazine (March 9, 2006)

Portable Band Saws
Five portable band saws that make short work out of cold steel.
TOOLS OF THE TRADE Magazine (May 8, 2006)

Hybrid Table Saws
Eight hybrid table saws go to work ripping stacks of lumber in a snowboard shop.
TOOLS OF THE TRADE Magazine (November 8, 2006)

Cordless Jigsaws
Ahead of the Curve: The cordless jigsaw category is open for business. We compared five models for power, performance, and convenience.
TOOLS OF THE TRADE Magazine (March 8, 2005)

14-Inch Band Saws
Band On the Run: We shop-tested seven new band saws for accuracy, power, and ease of adjustment.
TOOLS OF THE TRADE Magazine (May 18, 2005)

Worm Drives/Hypoids
Our fastest framer runs with the latest class of 7-1/4-inch wormdrive and hypoid saws.
TOOLS OF THE TRADE Magazine (September 29, 2005)

3-HP Cabinet Saws
We tested (and loved) these six heavy-duty cabinet saws, with features and performance that improve quality, productivity, and safety.
TOOLS OF THE TRADE Magazine (November 2, 2005)

Metal-Cutting Circ Saws
Six new metal-cutting saws take the pain out of cutting steel.
TOOLS OF THE TRADE Magazine (May 14, 2004)

Jig Saws
Cut curves - not corners - with these advanced and improved D-handle jigsaws.
TOOLS OF THE TRADE Magazine (July 8, 2004)

Sliding Compound Miter Saws
Indispensable on any site, 12-inch sliding compound miter saws meet demands on the job and in the shop.
TOOLS OF THE TRADE Magazine (July 8, 2004)

7-1/4-Inch Circular Saws
Here's what you should know about the 12 new sidewinder circ saws we field-tested for power, speed, and ease of use.
TOOLS OF THE TRADE Magazine (March 1, 2003)

Cut-Off Saws
Diamonds in the Rough: If you have to cut concrete, masonry, and steel, here are four tough cut-off saws that can do the job.
TOOLS OF THE TRADE Magazine (July 1, 2003)

Miter Saw With Up-Front Controls
New Bosch tool features an abundance of safety features.
TOOLS OF THE TRADE Magazine (November 1, 2002)

Cordless Recip Saws
We put a dozen new cordless recip saws to the test on big demo jobs and tough cuts in tight quarters.
TOOLS OF THE TRADE Magazine (March 1, 2002)

Contractor Table Saws
Need a table saw that can pull long shifts on the jobsite and double as a low-cost shop saw? Here are six tools powerful enough to do it all.
TOOLS OF THE TRADE Magazine (January 1, 2002)

Portable 10-Inch Table Saws
Power, stability, and accuracy set new standards for the lightweight table saws.
TOOLS OF THE TRADE Magazine (July 1, 2000)

Sliding Compound Miter Saws
From cripples to cornice to crown, sliding compound miter saws are the way to go. Our tester runs 11 saws from frame to finish.
TOOLS OF THE TRADE Magazine (July 1, 2002)

10-Inch Tile Saws
Here are four great wet saws that'll handle almost any material and job.
TOOLS OF THE TRADE Magazine (July 1, 2002)

8-1/4-Inch Circ Saws
If size matters, 8-1/4-inch circ saws are the way to go. We turned a veteran timber framer loose with two wormdrives and five sidewinders to find out which saws make the cut.
TOOLS OF THE TRADE Magazine (May 1, 2002)

Wormdrive Saws
Western framers swear by their wormdrive circ saws, so we put six of the latest models to the test.
TOOLS OF THE TRADE Magazine (May 1, 2000)