Adjustments

Image

The depth-of-cut setting is especially clear to see on the Ridgid saw.

Credit: Photo: dotfordot.com

Depth-of-cut setting scales are helpful as an approximate guide for quickly setting the blade depth, and are on all of the saws except the Hitachi and Panasonic. The best and easiest to use was on the Ridgid, with a clear view from the rear of the saw and markings at each 1/4-inch interval. The Metabo also is clearly marked and easy to see, but its scale is in centimeters. Makita took an innovative approach and has markings on the blade guard, which seemed accurate enough and was easy to read. The Craftsman and Milwaukee require you to view hard-to-read depth settings by looking through a narrow area between the handle and the upper blade guard. Hilti's tool is marked clearly on the saw body but has a similar viewing challenge. The guide on the DeWalt saw proved hard to line up and virtually unreadable, as the battery obscured its view.

All of the saws' bases tilt to allow a 50-degree bevel cut. The Hilti, Makita, and Ridgid have an override mechanism needed to get to an angle past 45 degrees, and these and the DeWalt all have a positive stop or detent to easily set a 45-degree cut. Markings are made down to the single degree on the DeWalt, Milwaukee, and Ridgid tools, which helps take the guesswork out of finding a specific, desired angle.

The other saws have markings at5-degree intervals, and all have a mark for 22 1/2 degrees.

Every saw can be recalibrated at its 90-degree blade angle stop, and the Makita also can be calibrated at its 45-degree stop.

Winner

The overall winner is the 36-volt Bosch 1671K, because it easily serves both framing and finish needs in one powerful, well-built package. A fast and long-lasting cutter, the battery gave the second most cuts per charge, and the feel and balance of this tool are quite comfortable. The adjustments for bevel cuts and setting the blade depth are easy to use, and the rafter hook is a nice pro touch.

There is no question from this test that the best dedicated framing saw is the Hilti. Contractors probably could put a crew in the field with the Hilti as their primary saw–it's that good.

For the best trim and siding saw, the Makita fits the bill perfectly. It's lightweight and compact and has all the right features. Its power and cutting efficiency are high, outperforming the other 18-volt saws. This is the tool that I would take up on the scaffold or use overhead for any trim or siding work.

Next in class come the Milwaukee and Ridgid saws, both good all-around tools, and the Hitachi, which I found to be a nice trim saw.

Following them in preference order are the DeWalt, 18-volt Bosch, Metabo, Craftsman, and the Panasonic.

–Steve Veroneau is a building and remodeling contractor in Falls Church, Va. Michael Springer is senior editor for Tools of the Trade.